Shenzhen Goldantell Technology Co.,Limited
Quality is our culture!
Product Details:
Payment & Shipping Terms:
|
Product Name: | Retractable Pedestrian Flap Barrier Gate With Rfid Reader Digital Door Lock | Working Voltage:: | AC220±10%V 50±10%HZ |
---|---|---|---|
Gross Weight: | 90KG | Communication Port: | RS485 ,TCP/IP |
Passage Width:: | ≤600 Mm | Compatible: | RFID Reader&Fingerprint Reader ,Coin Access,QR Code Reader,Bar Code System,ESD Tester Access Control, Remote Button |
Materal: | 304 Stainless Steel/316 Stainless Steel | Arm Width: | 265mm |
Highlight: | Flap Barrier Turnstile,automatic flap barrier |
Pedestrian Flap Barrier Gate with digital door lock , Stadium Turnstile systems
Flap Barrier Gate Specifications:
Item |
GAT-203-1( single motor )
|
Housing material:
|
304 stainless steel/316 stainless steel |
Working voltage:
|
AC220±10%V 50±10%HZ |
Normal running life:
|
3 million |
Retractable arm length:
|
265mm |
Time of opening:
|
0.6 second |
Passage width:
|
≤600mm |
Input interface
|
Relay signal, 12V level signal |
Reset time after break down:
|
10 seconds |
Direction:
|
single or bi-directional (optional) |
Drive motor:
|
DC 24 V brush motor |
Working environment:
|
indoor/outdoor (with a tent over) |
size
|
1200*280*980mm |
Features of Flap Barrier Turnstile:
1. Fault detection and alarm functions, easy to use and maintenance.
2. The running status can be programmed and controlled with the built-in keyboard on the main board.
3. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop
working automatically within the prescribed time and reset again after the default delay (till fully reset).
4. Anti-breakthrough function. The gate is locked automatically until opening signal received.
5. Synchronization functions (for dual gate equipment).
6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5
seconds), the system will cancel the authority of the current user automatically.
7. Gate can be set as normally open or normally closed.
8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access
controller needed).
9. Direction can be set as single-direction or bi-direction.
10. LED direction indicator.
11. Alarm function, in case of illegal intrusion and reverse intrusion, etc.
12. Counter function (optional)
13. Reset function by photocells,Anti-pinch function by photocells, ( 3 or 5 pairs sensors)
14. Anti-illegal in, anti-intrusion, auto close for reverse direction
Application Areas
Contact Person: Charlene Lu
Tel: 86 18025437918
Fax: 86-755-27209118
Anti Tailgating Biometric Handicap Access Turnstile Gate
QR Code Nfc Reader Pedestrian single security turnstile gate with roof For Railway
Half Height Bi Directional Security Turnstile Gate With Card Reader
CE Approved Flap Barrier Gate With IR Sentor Function To Prevent Pinch / Trailing / Retrograde
Fingerprint Time Attendance entrance turnstiles , Bi - directional subway turnstiles
Full Automatic Flap Barrier Gate With Reader Card / Fingerprint Recognition For Gym / Club Entrance
Entrance Swing Barrier Gate With RFID Card Reader And Software Management
Full Automatic Bi-directional Swing Barrier Gate Security For Supermarket 120 - 160 mm Width
Stainless Steel Customizable Special Logo Bidirectional Swing Barrier Gate / Automatic Turnstile